How to Use Different Types of Trimmers

Being included in one of the best gardening tools, string trimmers are not just helpful in trimming but also allow users to remove or edge grass and weeds in rocky places where mowers are not so effective. However, the main job is how to choose an ideal trimmer.

Trimmers work in the way their names imply. They are equipments that utilize whirling plastic strings so that it can easily work to trim and cut weeds. Although, there are a number of plastic string textures and thickness, most the models can perform limited work and compliment certain types of requirements.

Basically, there are three types of string trimmers what suit certain types of tasks and enable customers to work on specific weeds. Following are the three kinds:

Cordless string trimmers

These types of trimmers are portable, durable and low priced. They are amazingly ideal for almost all types of trimming and edging requirements as they allow users to go wherever they want and work in the way they want. These trimmers are less expensive compared to gas operated trimmers.(Read more)

They are also environmentally friendly as they are powered by battery and let customers to even carry it to their desired place. These trimmers provide same mobility like you will find in gas powered models having benefits to overcome the dependency over fossil fuels. Latest models available in the market are rechargeable that allow users to recharge them whenever they want.

Since these trimmers are battery powered, light in weight and portable, they can effectively help to do basic weed and grass trimming tasks. Sometimes, users will have to take additional battery packs in order to ensure there will not be any hurdle during their task.

Corded string trimmers

Corded weed trimmers are usually less expensive as compared to cordless. The models are provided with less than three amperes power supply that is particularly ideal for small areas having normal weeds to edge or trim.

Versions available with three amperes power is usually strong enough to work on large areas however, do not work efficiently to cut the brush. The truth behind being called corded is that they always require access to electric outlets and contain a long cord to get power and work on the desired place.

Gas powered trimmers

This kind of trimmer is available with four cycle and 2 cycle models. The two-cycle gas powered trimmers have lots of power to work on normal as well as hard weeds. They can work on large yards as well. Most of the models feature separate throttle and choke controls in order to facilitate users with ease in operation.

The two-cycle engine string trimmers are especially suitable for people who wish to get more power within their affordable range. Some trimmers work with metallic blades and other types of attachments this making themselves versatile according to the customers’ needs and price charged.

You can use them to work on large areas for a comparatively shorter period of time. However, their use might seem to be daunting because they always need certain proportion of oil mixed with the gas.

Four cycle engine trimmers are declared to be actual power houses as they offer maximum strength to the users. They are good in looks, having large sizes and facility to reach any desired place. they operate on regular gas due to which, it is easier for most of the customers to buy and use them.

They run smoother as compared to two cycle engine trimmers and do not even produce much sound. These trimmers are versatile that consist of metallic blades for cutting.

After reading this complete buying guide, I am sure you would have got all the answer of your questions and now, it is recommended to immediately evaluate your needs, choose the best possible option and start trimming!

Steps to use string trimmers

String trimmers are among the powerful tools that work as per the requirements of their users-whether they want to trim grass or weeds and wish to edge sidewalks, driveways and areas around the fence. They are capable to certainly beat the hedge shears for edging and trimming.

Just like every other tool available in the market, the weed trimmers are available in three versions, consisting of battery powered cordless, electric corded and gas operated.

Every version needs to be handled with great care and if you are a novice and want to get some basic tips, then go ahead.

  1. Wear preventive clothing: It is the most essential thing to adopt while using a string trimmer. Since eyes are very delicate, you always have to wear protective glasses in order to avoid prevent them from potential damages. Even debris or small pieces of snapped line travelling with a speed of 200 or 300 MHP can cause serious injuries. Always dress yourself in heavy trousers instead of going with sandals or shorts as they will protect your legs from debris along with shoes made of steel soles and caps to avoid damages from nails, glass, metal or any other nasty item.
  2. Inspect area before trimming: Always check the surface of area you want to trim. Remove bits of metal, glass so that nothing can be caught by the trimmer’s line and your body will remain safe.
  3. Take care of the extension cords: Always be careful while dealing with an electric trimmer. Do not tangle with the cords because it might increase your hassle to work in the garden.
  4. Keep the bystanders safe: You should have to take care of people standing near you while trimmer is in operation. In this way, they will remain safe from debris flying in the air.

21 Money Saving Tips for the Organic Gardener

Organic gardening has several benefits such as improving soil health and more importantly producing free of toxics food and veggies. There are several tips to start an organic garden on budget.

  1. Choose plants that can well adapt to the climate of growing zone. Therefore, there will not any special care needed.
  2. Make sure that the planting area is not contaminated with lawn fertilizers and chemicals.
  3. Choose plants that have high yields and thus higher cost benefits. For instance tomato is a plant with high yield.
  4. Grow plants from seeds instead buying them from store.
  5. Regrow vegetables such as lettuce, celery, green onion, and mushroom from scraps.
  6. Use mulch to reduce the watering expenses as it helps the soil retain water for a longer time. It has also some other benefits including improving soil fertility and preventing unwanted plants to grow which means less weeding. Spread over a thin layer of mulch such as leaves, hay, and wood chips on the soil.
  7. Use dried fallen leaves as additional mulch during winter which also insulates plants.
  8. Use your recycle bin and yard waste a free alternative for mulch. You can use sheets of used newspapers, grass clippings, or used straws to spread over on the soil surface.
  9. Use newspapers to make seed starting pots instead of spending money to buy them.
  10. Use old paper sheets or cardboard to cover plants and protect them from overnight freezing and frosts.
  11. Collect rain water into barrels and use it for watering plants.
  12. Use the water used for boiling or steaming vegetables to irrigate plants.
  13. Make a watering can from an used plastic jug.
  14. Use eggshells as fertilizer and a suitable source of calcium for plants. Crumble eggshells and spread them around the plants. They will decompose quickly as they have a high surface area to volume ratio.
  15. Bone meals are excellent fertilizers for tomato plants. Clean them first and bake them in the oven for three hours. Then grind them into powder and use as fertilizer.
  16. Use leftover vegetable scraps, grass clippings, dry leaves, and used paper to make compost.
  17. Use leftover tealeaves and ground coffees as nutritious source for acid-loving plants.
  18. Make pest spray by mixing hot soapy water with chopped garlic and hot pepper.
  19. Put some barrels of water in the garden to attract frogs and insect-eating birds.
  20. Flatware such as serving spoons and forks which are not used anymore can be used as suitable tools for working in a small garden.
  21. Use flat stones with different sizes to write the name of plants on them and making natural plant markers.

Zero Turn Mowers vs Normal Riding Mowers

There are two styles of lawn mowers in the market, the conventional riding mower and the the zero turn lawn mower. Lets take some time to compare the two.

The conventional riding mower (or ride on mower) can take 4 to 28 inches to turn 180 degrees at the end of each directional cut, while the the zero turn mower can turns on the spot allowing you to get into tight spots. Using a zero turn mower will allow you to cut your grass quicker as you don’t need to go back over spots that you’ve missed with a conventional ride on mower.

There is of course a price difference – with convenience comes cost. The conventional rider is cheaper than the zero turn radius mower with prices ranging from $2,000 to $4,000. Zero turn mowers usually range in price from $3000 to $5000.

Another major difference between the two lawn mowers is the steering system . While the conventional riding lawn mower has a standard steering wheel, much like a car or tractor, the zero tun has two steering handles that separately control the two rear wheels. With the ZTR’s handle style steering, pushing one handle forward while pulling the other back will have you turning on the spot (thus the name zero turn!).

The handle steering does take a little getting used to, but once you’ve mastered it, you’ll wonder how you ever cut grass on a standard rider.

You will also notice that most zero turn mowers have their blades positioned out in front. This means that you don’t have two front wheels flatting the grass before the blades have the chance to cut it. With ZTR’s you end up with a cleaner more even cut that on your standard rider.

When you decide to buy a zero turn mower, make sure you buy from a reputable dealer and choose one with a decent warranty.

We’re seeing more and more ZTM’s being bought domestically, which is great as prices seem to be coming down as their popularity goes up. Traditionally only used by well to do golf clubs, we’re seeing more and more people buying zero turn mowers for homes and rural properties.

Should you decide to spend that little bit extra and buy a zero turn lawn mower, you won’t regret it. Since I bought mine 12 months ago, I can’t believe how I ever lived without it. It’s reduced my lawn maintenance time by one third; I use less fuel and get the job done much quicker. The also looks better for it.

Stringing a Weed Eater the Right Way

If you are looking for a tool that can trim areas of your yard that a lawn mower cannot, then a weed eater is the ultimate solution. Not only it’s a handy trimmer but also chops off weeds in a couple of minutes. Like any other equipment, Weed eaters also require periodic maintenance though not costing too much on the owner because over a period of time its string eventually gets worn out due to knocking off with stones, rocks or bricks during its course of work. Stringing a weed eater can be quite intimidating but once you get the knack of it, it becomes the handiest garden tool ever!

Step 1 – Purchase the correct string

The first question arises, when does a weed eater need restringing? Well just when it is not trimming anymore it’s time to restring. The most important part is the purchase of a correct string size, which usually ranges between 0.065 inches to 0.095 inches, here you need to consult the manual because the size should be according to the manufacturer’s recommendation. Inappropriate size can deteriorate the engine quickly.

For installation of a string of 300-900 feet length, loop it according to the arrows on the spool. Pre-loaded spools are also available in the market which cost a lot more but then it’s worth the time and effort you lend in.

Step 2 – Accessing the Spool

To access the spool its cover should be removed by pushing the lock inwards and turning the spool in a counter-clockwise motion. If a security ring is present it should also be removed. Now the last step in accessing the spool is to locate the automatic feed button and then remove it as well.

Step 3 – Releasing the Spool

Clean up your weed eater thoroughly as a lot of stuff might be stuck in it. Once you are done with the cleaning it’s time for releasing the spool. It is done simply by pushing it down to discharge the locking stubs, then take the spool out.

Step 4 – Setting up the string

Set up the string in the lower deck in an inverted “J” movement this will help to protect the end. Keep on wrapping it according to the arrows right till the top of the chamber. Lastly fix the string in the upper and lower grooves of the deck.

Step 5 – Fix the string

Place the spool back in its chamber. Poke the string into the left and right slits on the sides and fix the spool quickly and safely in its place. Lastly pull the ends of the string simultaneously to check if there’s a locking sound. If it is then place it back in. It is extremely important to secure the guard before putting your weed eater to use as it acts as a defense for you against flying debris or an accident in case of loose spool. A loose spool can shoot off and result in hazards so make sure that all parts are secured and in place before putting your weed eater to use.

These five simplified steps to string your weed eater will come in quite handy. Like every machine a weed eater also needs proper maintenance to work through years. However, if properly maintained, the equipment can go a long way in serving and easing our work load to a great extent.